Gas Boosters

Continental Industrie gas boosters can be operated with differential pressures up to 3.000 Nm3/h to pressures attaining 180 mbar, depending on blower size and intake pressure. Realizing the importance of safety and dependability in systems handling gases, we have incorporated a number of safety features in design and construction of our blowers and exhausters for inert, toxic, corrosive, flammable gases and air/gas mixture applications. The incorporation of many special features assures a gas tight construction with non in-leakage of air or out-leakage of gas. Continental offers ATEX blowers for EX-zones 1 and 2 for the landfill and biogas, designed with the experience of thousands of installed ATEX boosters.

> Read more about Biogas

- Biogas flow range up to 1.500 Nm3/hr with pressure rise of 70 mBar.
- Higher flow-pressure performance than the competitors.
- Skid mounted plug-and-boost unit.
- Robust design.
- Resistant standard painting for outdoor installation (special paints on reques).
- Automatic grease lubrication.
- Small footprint for flexible installation.
- Flexible configuration due to different outlet orientations.
- Low noise due to aluminium impeller and solid cast iron housing.
- Efficient because of smaller motor for 1-stage aluminium impeller acceleration.
- 1 motor XX kW 4 poles IP55 B3 1 Class F 380V/3/50HZ- 440V/3/60HZ Ex d IIB T4 suitable for VFD with DD.

> Leaflet PDF    > Detailed Description

- Biogas flow range up to 3.000 Nm3/hr with pressure rise of 180 mBar.
- Higher flow-pressure performance than the competitors.
- Skid mounted plug-and-boost unit.
- Robust design.
- Resistant standard painting for outdoor installation (special paints on reques).
- Automatic grease lubrication.
- Small footprint for flexible installation.
- Flexible configuration due to different outlet orientations.
- Low noise due to aluminium impeller and solid cast iron housing.
- Efficient because of smaller motor for 1-stage aluminium impeller acceleration.
-1 motor XX kW 4 poles IP55 B3 1 Class F 380V/3/50HZ- 440V/3/60HZ Ex d IIB T4 suitable for VFD

> Leaflet PDF    > Detailed Description

For more flow demand Continental Industrie can offer a new generation of high efficiency Blowers delivering from 100 to 55.000 m3/h dry, clean, non pulsating air with pressures of 1,1 Bar and vacuums of up to 6.700 mm H2O (WG). Corrosive or toxic materials require special consideration. Each application must be individually reviewed to see if we can incorporate available modifications to our equipment in order to successfully handle the gas in question. Sometimes the gases we are trying to contain with the specific sealing feature will attack some materials or materials of our standard of construction. In many instances, we can offer alternates to overcome this.

> Multistage Models